EMINENCE THE TONKER
Šifra: 6251
Na stanju
Regularna cijena:
159,00 EUR
Cijena sa popustom *
Cijena za kupovinu na rate:
Cijena sa popustom *
139,00 EUR
PDV je uračunat u cijenu
Iznos rate:
*Cijena sa popustom može se ostvariti ukoliko se plaća gotovinom, virmanom (preko računa) ili debitnom i kreditnom karticom odmah i odjednom.
Prikazana cijena je za komad.
Garantiramo najnižu cijenu na tržištu!
U slučaju da pronađete isti proizvod po povoljnijoj cijeni,
molimo Vas da nas kontaktirate na:
info@player.hr
EMINENCE THE TONKER
150W, 8 ohm
SPECIFICATION | |
Nominal Basket Diameter | 12", 304.8mm |
Nominal Impedence* | 8 ohms |
Power Rating** | |
Watts | 150W |
Music Program | N/A |
Resonance | 89Hz |
Usable Frequency Range | 70Hz - 5.5kHz |
Sensitivity*** | 102dB |
Magnet Weight | 59 oz. |
Gap Height | 70Hz - 5.5kHz |
Voice Coil Diameter | 0.31", 7.92mm |
THIELE & SMALL PARAMETERS |
|
Resonant Frequency (fs) | 89Hz |
DC Resistance (Re) | 7.36 |
Coil Inductance (Le) | 0.47mH |
Mechanical Q (Qms) | 10.02 |
Electromagnetic Q (Qes) | 0.49 |
Total Q (Qts) | 0.47 |
Compliance Equivalent Volume (Vas) | 34.1 liters / 1.2 cu.ft. |
Peak Diaphragm Displacement Volume (Vd) | 42cc |
Mechanical Compliance of Suspension (Cms) | 0.09mm/N |
BL Product (BL) | 17.4 T-M |
Diaphragm Mass Inc. Airload (MMs) | 36 grams |
Efficiency Bandwidth Product (EBP) | 181 |
Maximum Linear Excursion (Xmax) | 0.8mm |
Surface Area of Cone (Sd) | 519.5 cm2 |
Maximum Mechanical Limit (Xlim) | N/A |
MOUNTING INFORMATION |
|
Recommended Enclosure Volume | |
Sealed | Acceptable |
Vented | Acceptable |
Driver Volume Displaced | 137.3 cu.in. / 2.25 liters |
Overall Diameter | 12.02", 305.3mm |
Baffle Hole Diameter | 10.97", 278.6mm |
Front Sealing Gasket | Fitted as standard |
Rear Sealing Gasket | Fitted as standard |
Mounting Holes Diameter | 0.25", 6.4mm |
Mounting Holes B.C.D. | 11.63", 295.4mm |
Depth | 5.2", 132mm |
Net Weight | 11.1 lbs, 5 kg |
Shipping Weight | 13.2 lbs, 6 kgs |
MATERIALS OF CONSTRUCTION |
|
Coil Construction | Copper voice coil |
Coil Former | Polyimide former |
Magnet Composition | Ferrite magnet |
Core Details | Non-vented core |
Basket Materials | Pressed steel basket |
Cone Composition | Paper Cone |
Cone Edge Composition | Paper cone edge |
Dust Cap Composition | Zurette dust cap |
Ocena: