DAS AUDIO PA-500
Garantiramo najnižu cijenu na tržištu!
U slučaju da pronađete isti proizvod po povoljnijoj cijeni,
molimo Vas da nas kontaktirate na:
info@player.hr
– 250 W x 250 W at 4 Ω
– Input Sensitivity Selector
– Stereo/Bridged/Parallel Operation
– speakON output connectors
– Clip, protection and Signal present LED indicators
The PA series amplifiers are designed and built to provide an affordable, quality powering solution. The wide range of models makes the series ideal for both installed or mobile sound reinforcement applications. The amplifiers incorporate a rugged 2 unit all-steel chassis ensuring structural rigidity. The low-noise fans offer both quiet and cool operation. The amplifier incorporates rear located switches which permit, operational mode selection (bridge, stereo or parallel) and input sensitivity selection.
Stereo Mode (both channels driven) 8 ohms EIA 1 kHz 1% THD |
150 W |
4 ohms EIA 1 kHz 1% THD | 250 W |
Bridge Mono Mode 8 ohms EIA 1 kHz 1% THD |
400 W |
Frequency Response | 20 Hz-20 kHz +0-1 dB |
Signal to Noise Ratio (20 Hz-20 kHz) | > 100 dB |
Distortion (SMPTE-IM) | ≤ 0.35% |
Total Harmonic Distortion (20 Hz-20 kHz) | ≤ 0.35% |
Damping Factor @ 8 ohms | > 200 |
Input Sensitivity @ 4 ohms | 0.775 V o 1.4 V |
Voltage Gain | 27 dB |
AC Requirements | 230 V AC 50 Hz |
Current Draw (1/3 power @ 230 V) | 2.8 A |
Dimensions (H x W x D) | 8.8 x 48.2 x 22.7 cm 3.5 x 19 x 8.9 in |
Weight | 10.1 kg 22.3 lb |