+
−
MARTIN WISMAN SPX 250A
Šifra: 9257
Na stanju
Regularna cijena:
399,00 EUR
Cijena sa popustom *
Cijena za kupovinu na rate:
Cijena sa popustom *
299,00 EUR
PDV je uračunat u cijenu
Iznos rate:
*Cijena sa popustom može se ostvariti ukoliko se plaća gotovinom, virmanom (preko računa) ili debitnom i kreditnom karticom odmah i odjednom.
Prikazana cijena je za komad.
Garantiramo najnižu cijenu na tržištu!
U slučaju da pronađete isti proizvod po povoljnijoj cijeni,
molimo Vas da nas kontaktirate na:
info@player.hr
The SPX 250A features a molded polypropylene enclosure that it inherently weather resistant. Amplification, mixing and monitoring for electronic and electro-acoustic instruments. Martin Wisman used advanced program techniques to create the most successful and influential professional speaker system. High power, efficiency, lower distortion and great low frequency extension provide an unbelievable performance.
The SPX 250A can be used for live sound reinforcement, vocals, speech and music playback in entertainment, schools, pub, coffee shop and outdoor venues. Portability is one of the important factors for choice especially.
For permanent suspension or attaching brackets, the SPX 250Aalso has two M8 inserts on the top and bottom, two on the side, for a total of 5.
Key Features
High Impact Molded Polypropylene Enclosure
10" LF Transducer
1.4" Voice Coil, 1" Exit Titanium Compression Driver
5 Integral Suspension Points
Complete Mounting Solutions
Smooth Response With High Power Handling Capacity (Long Term/Max), 119dB/122dB
80 x 60 Coverage Pattern
Technical Specifications
Freq. Range (-10dB): 60Hz~20kHz
Freq. Response (-3dB): 65Hz~20kHz
Rec.Hipass Frequency: 40Hz
Max Calculated SPL: 122dB
Amplifier Power LF: 250W
Amplifier Power HF: 50W
LF Transducer: 10"/65mm
HF Transducer: 1"/34mm
Crossover Frequency: 3.5kHz
Loop/Mix Out: XLR/M,Balanced
AC Input: 220/240 V, AC, 50/60Hz, 300 Watts
Dim (WxHxD): 332mm x 557mm x 313mm
Net Weight: 19Kg
Shipping Weight: 21Kg
Horizontal Coverage: 80º
Vertical Coverage: 60º
The SPX 250A can be used for live sound reinforcement, vocals, speech and music playback in entertainment, schools, pub, coffee shop and outdoor venues. Portability is one of the important factors for choice especially.
For permanent suspension or attaching brackets, the SPX 250Aalso has two M8 inserts on the top and bottom, two on the side, for a total of 5.
Key Features
High Impact Molded Polypropylene Enclosure
10" LF Transducer
1.4" Voice Coil, 1" Exit Titanium Compression Driver
5 Integral Suspension Points
Complete Mounting Solutions
Smooth Response With High Power Handling Capacity (Long Term/Max), 119dB/122dB
80 x 60 Coverage Pattern
Technical Specifications
Freq. Range (-10dB): 60Hz~20kHz
Freq. Response (-3dB): 65Hz~20kHz
Rec.Hipass Frequency: 40Hz
Max Calculated SPL: 122dB
Amplifier Power LF: 250W
Amplifier Power HF: 50W
LF Transducer: 10"/65mm
HF Transducer: 1"/34mm
Crossover Frequency: 3.5kHz
Loop/Mix Out: XLR/M,Balanced
AC Input: 220/240 V, AC, 50/60Hz, 300 Watts
Dim (WxHxD): 332mm x 557mm x 313mm
Net Weight: 19Kg
Shipping Weight: 21Kg
Horizontal Coverage: 80º
Vertical Coverage: 60º
The SPX 250A features a molded polypropylene enclosure that it inherently weather resistant. Amplification, mixing and monitoring for electronic and electro-acoustic instruments. Martin Wisman used advanced program techniques to create the most successful and influential professional speaker system. High power, efficiency, lower distortion and great low frequency extension provide an unbelievable performance.
The SPX 250A can be used for live sound reinforcement, vocals, speech and music playback in entertainment, schools, pub, coffee shop and outdoor venues. Portability is one of the important factors for choice especially.
The SPX 250A can be used for live sound reinforcement, vocals, speech and music playback in entertainment, schools, pub, coffee shop and outdoor venues. Portability is one of the important factors for choice especially.
For permanent suspension or attaching brackets, the SPX 250Aalso has two M8 inserts on the top and bottom, two on the side, for a total of 5.
Key Features
- High Impact Molded Polypropylene Enclosure
- 10" LF Transducer
- 1.4" Voice Coil, 1" Exit Titanium Compression Driver
- 5 Integral Suspension Points
- Complete Mounting Solutions
- Smooth Response With High Power Handling Capacity (Long Term/Max), 119dB/122dB
- 80 x 60 Coverage Pattern
Technical Specifications
| Freq. Range (-10dB): | 60Hz~20kHz |
| Freq. Response (-3dB): | 65Hz~20kHz |
| Power | 300W RMS |
| Max Calculated SPL: | 122dB |
| Amplifier Power LF: | 250W |
| Amplifier Power HF: | 50W |
| LF Transducer: | 10"/65mm |
| HF Transducer: | 1"/34mm |
| Crossover Frequency: | 3.5kHz |
| Loop/Mix Out: | XLR/M,Balanced |
| AC Input: | 220/240 V, AC, 50/60Hz, 300 Watts |
| Dim (WxHxD): | 332mm x 557mm x 313mm |
| Net Weight: | 19Kg |
| Shipping Weight: | 21Kg |
| Horizontal Coverage: | 80º |
| Vertical Coverage: | 60º |
Ocena:
Vezani artikli
Srodni proizvodi
