+
−
DAS AUDIO CL-8T
Šifra: 1884
81,89 EUR
*Cijena sa popustom može se ostvariti ukoliko se plaća gotovinom, virmanom (preko računa) ili debitnom i kreditnom karticom odmah i odjednom.
Prikazana cijena je za komad.
Garantiramo najnižu cijenu na tržištu!
U slučaju da pronađete isti proizvod po povoljnijoj cijeni,
molimo Vas da nas kontaktirate na:
info@player.hr
CL 8T Ceiling Loudspeakers
2-way passive full range ceiling loudspeaker that incorporates an 8" cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.
Two-way full range ceiling speaker
8 in. low frequency driver
Coaxial tweeter
70V, 100V distributed systems
High effeciency multi-tap transformer
SPECIFICATIONS
Frequency Range (-10 dB)
50 Hz – 20 kHz
Tap Selection 100V
30-20-10
Tap Selection 70V
15-10-5
On-Axis Sensitivity 1W/1 m
90 dB SPL
Cut Out Diameter
9.52 in.
Impedance
Line
Weight
4.2 lbs
The 2-way passive full range ceiling loudspeaker shall incorporate an 8 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 60W. Frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 90 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 30W multi-tap input transformer.The system shall be a D.A.S. CL-8T.
2-way passive full range ceiling loudspeaker that incorporates an 8" cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.
Two-way full range ceiling speaker
8 in. low frequency driver
Coaxial tweeter
70V, 100V distributed systems
High effeciency multi-tap transformer
SPECIFICATIONS
Frequency Range (-10 dB)
50 Hz – 20 kHz
Tap Selection 100V
30-20-10
Tap Selection 70V
15-10-5
On-Axis Sensitivity 1W/1 m
90 dB SPL
Cut Out Diameter
9.52 in.
Impedance
Line
Weight
4.2 lbs
The 2-way passive full range ceiling loudspeaker shall incorporate an 8 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 60W. Frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 90 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 30W multi-tap input transformer.The system shall be a D.A.S. CL-8T.
CL 8T Ceiling Loudspeakers
2-way passive full range ceiling loudspeaker that incorporates an 8" cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.
- Two-way full range ceiling speaker
- 8 in. low frequency driver
- Coaxial tweeter
- 70V, 100V distributed systems
- High effeciency multi-tap transformer
| SPECIFICATIONS | |
|---|---|
| Frequency Range (-10 dB) | 50 Hz – 20 kHz |
| Tap Selection 100V | 30-20-10 |
| Tap Selection 70V | 15-10-5 |
| On-Axis Sensitivity 1W/1 m | 90 dB SPL |
| Cut Out Diameter | 9.52 in. |
| Impedance | Line |
| Weight | 4.2 lbs |
The 2-way passive full range ceiling loudspeaker shall incorporate an 8 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.
The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 60W. Frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 90 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.
The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 30W multi-tap input transformer.
The system shall be a D.A.S. CL-8T.
Ocena:
