SPL Phonitor 2 Black - pojačalo za slušalice
Garantiramo najnižu cijenu na tržištu!
U slučaju da pronađete isti proizvod po povoljnijoj cijeni,
molimo Vas da nas kontaktirate na:
info@player.hr
The headphone amplifier and monitoring controller with 120V technology
Phonitor 2 is the ultimate headphone amplifier and monitoring controller with 120V technology for demanding sound and mastering engineers. The Phonitor Matrix enables mixing and mastering on headphones in the highest quality – just like on loudspeakers.
Specifications
Analog inputs & outputs; XLR (balanced), RCA
Maximum input & output gain: 32.5 dBu
Input impedance (RCA): 10 kΩ
Input impedance (XLR): 20 kΩ
Output impedance (XLR): 75 Ω
Common mode rejection (XLR): -82 dB
Frequency range (-3 dB): 4 Hz – 300 kHz
THD +N (10 Hz – 22 kHz, 0 dBu): 0,00085 %
Noise (A-weighted): -103,8 dBu
Crosstalk (1 kHz): -106 dB
Dynamic range: 136,3 dB
Standard Headphones Output, 6.35 mm (1/4") TRS Jack
Wiring: Tip = Left, Ring = Right, Sleeve = GND
Source impedance: 0.18 Ω
Damping factor (40 ohms): 180
Frequency range (-3dB): 10 Hz – 300 kHz
Crosstalk (1 kHz): -90 dB
THD +N (10 Hz – 22 kHz, 0 dBu): 0.00091 %
Noise (A-weighted): -103 dBu
Output power (1 kHz, 1% THD, 600 Ω): 2 x 2.7 W
Output power (1 kHz, 1% THD, 250 Ω): 2 x 5 W
Output power (1 kHz, 1% THD, 32 Ω): 2 x 1 W
Dynamic range: 135.5 dB
Internal Linear Power Supply with Shielded Toroidal Transformer
Operating voltage for analog audio: +/- 60 V
Operating voltage for relays and LEDs: +12 V
Mains Power Supply
Mains voltage (selectable, see fuse chamber): 230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V: T 630 mA
Fuse for 115 V: T 1.25 A
Power consumption: max. 40 VA
Dimensions & Weight
W x H x D (width x height incl. feet x depth): 278 x 100 x 300 mm (11 x 4 x 11.81 inch)
Unit weight: 4.3 kg (9.5 lbs)
Shipping weight (incl. packaging): 5.4 kg (11.9 lbs)
Vezani artikli
Srodni proizvodi
